Sanding The Hull

The sander part came today. The velcro pad that the sandpaper sticks

to was worn out. Now its ready for the fiberglass.

Maybe tomorrow if the weathers nice.

All the putty is on and once the sanding's finished,

hopefully this week, I can put the fiberglass on the hull.

I brought the kayak outside to sand it.

When I was about 3/4 the way done, the velcro

pad on my sander that holds on the sand paper

became un-velcroed. The sandpaper wont stick to it.

So while Im waiting for the new one to come,

I patched in the couple open joints with epoxy putty.

After the bow and stem pieces were glued on,

I planed down all the extra wood. Hand planing for an hour give you

blisters :D